GEDA 300 Z / ZP Man and Material Hoist

The Design of GEDA 300 Z/ZP Man and Material Hoist is made to allows you to access with the full base through a normal door of a room. You can easily remove the ramps of the loading platform and fold it.

The GEDA 300 Z/ZP Hoist can be easily moved through doors and can be placed inside the elevator. The complete hoist occupies only 1.6 x 1.5 m of space. Very little. This is possible also because of the flat shape of the cable collector.

• The loading and unloading ramp is exchangeable
• The loading front door is available as an optional
• The motor is 230 Volts 16 Amps only
• The same system, columns and anchor parts of GEDA 500Z/ZP, GEDA 1500 Z / ZP GEDA 500Z, GEDA MCP 750/1500. Very important for rental companies.
• Hook lift system is suitable for GEDA 500Z/GEDA 500Z/ZP
• Automatic lubrication system is an essential accessory.

The base unit consists of:

• Base Column Section from 1.9 mt
• Overtravel safety device
• Detachable base with 4 adjustable stabilizers
• Safety stop at about 2 mt from the ground with acoustic signal
• Upper and lower safety limit
• Control panel permanently installed, with key switch, for use and assembly and 30 Volt power point
• Stop in case of overload with signal
• Manual control with 5 mt of cable
• Platform Size 0.85 x 1.4 mt